Circle Your Feet Draw Six

Download Commodity

Download Article

There are a number of different ways to divide circle into equal parts. If y'all are using a pencil and paper, y'all will need a compass to divide the circle accurately into six equal pieces. If you demand to divide the circle for graphic design purposes, y'all may want to utilize Adobe Illustrator or InDesign. Although these programs are similar, the methods to separate the circumvolve are unique to each program.

1. 1

   Describe a circumvolve with the compass. Align the pencil tip with the tip of the needle. Place the signal of the compass down on the paper. Set the distance between the pencil and needle equal to the radius of the circumvolve that you would like and draw. Swing the compass around 360° to complete the circle.^[1]

   • Make sure the swivel is tight and so it doesn't slip while drawing.
   • Also make sure the pencil is securely in its holder and so it also doesn't motion while drawing.
   • This commencement circle is the chief circle that you will be dividing.

2. 2

   Draw a second circle whose center is the edge of the first circle. Place the needle of the compass at whatever point along the edge of the main circle. Keep the distance between the needle and pencil the aforementioned as the first circle. Swing the compass effectually to complete the 2nd circumvolve.^[ii]

   • The 2nd circle should overlap with the first circle and the edge should cross through the eye of the offset circle.
   • If the distance between the needle and the pencil changes at all, the circle will not exist divided equally.

   Advertisement

3. 3

   Use the intersection of the outset and 2d circumvolve to draw a 3rd circle. Place the needle at the intersection of the first and second circumvolve. At that place are ii intersections and you tin use either i; this will exist the center of a third circumvolve. Use the compass to complete the 3rd circle.^[iii]

   • Once more, go along the compass at the same altitude for every circle you draw.
   • At this point you lot should have iii overlapping circles. You should notice that the two outer circles overlap with the center of the first primary circle.

4. 4

   Depict a fourth circle using the intersection of the main circle and the third circle. But as you lot did to draw the second and tertiary circle, use the intersection of the 3rd circumvolve with the master circumvolve as the centre point. Remember, going clockwise around the circumvolve, you will use the intersection to the left of the circle. Place the compass on that intersection and draw a fourth circle.^[four]

   • You are halfway washed with drawing circles.

5. 5

   Draw three more circles using the next intersection of each circumvolve. Using the intersection of the previously fatigued circle with the main circle as the center, draw the next circumvolve. Continue the next three circles until you have a full of vi circles all effectually the main circle.^[5]

   • The inside of your original circle should now look similar a vi petaled bloom.

6. 6

   Use a ruler to draw a straight line through the heart of the circle. This is the beginning of three lines you volition demand to draw to dissever the circle into vi parts. Every line, including this one, should cantankerous the exact heart of the circumvolve and divide two of the six inner "flower petals" of your drawing in half.

7. seven

   Draw another direct line 1 flower petal (or 60 degrees) clockwise from the first. This line will bifurcate two reverse flower petals and will get through the verbal center of the circumvolve.^[6]

8. 8

   Draw your final straight line one more flower petal (or sixty degrees) clockwise from the last. You now have a circle divided into vi equal parts.

   Advertizing

1. ane

   Draw a line through the center of the circumvolve. The first step to dividing the circumvolve is cutting information technology directly in half. Choose a point anywhere forth the circle and describe a line through the center of the circle to the opposite stop. The circle is now divided into two equal pieces.

   • This method works well if y'all are trying to cut a pie or a block.

2. two

   Draw two more lines that split up one half of the circumvolve into thirds. Next, you want to depict two lines that cut the half into thirds. You tin can guess this by dividing one half of the cake into three equal pieces.

   • Get every bit shut to iii equal pieces as possible. Again, this method is just an approximation.

3. 3

   Extend those lines into the other half of the circle. Continue both of those lines through the center of the circle to the contrary side of the circle. If done correctly, the circumvolve should now be divided into half dozen approximately equal parts.

   • This method is not exact, but is an easy way to divide the circle into six equal parts past heart.

   Advertisement

1. ane

   Launch Adobe Illustrator. If you accept a shortcut on your desktop, y'all can open the application by double-clicking on this icon. If you don't have a shortcut, use the start menu or search for the application and open information technology from the search bar.

2. 2

   Locate the Polar Grid tool. The Polar Grid tool is one of the options in the toolbar on the left side of your screen. It is under the Line Segment group of tools. Information technology kind of looks like a spider web; information technology is a circumvolve with divided lines through information technology.

   • To see the tools nested underneath the Line Segment, click and hold on the Line Segment tool until a window opens with more options.
   • Click on the Polar Grid tool to activate it.

3. 3

   Click and drag to create a circle. With the Polar Filigree tool agile, click on the canvass and drag the mouse to create the circle. You should see a circle appear that likely has smaller concentric circles within it. These can be removed subsequently.

   • While dragging, adjust the size of the circle by dragging in and out until yous reach the desired size.
   • Hold ⇧ Shift to snap to a perfect circle.
   • Proceed holding ⇧ Shift and don't release the mouse click until you end the side by side step.

4. 4

   Separate into parts using the arrow keys. While dragging the circumvolve, press on the right pointer primal until you encounter that the circle has been divided into 6 equal parts. If yous accidentally press the cardinal too many times, simply push button the left arrow key to decrease the number of divisions.

   • When the circle is the size you want and divided into 6 equal parts, yous tin allow become of the mouse.
   • If you lot permit go of the mouse too early, there is an alternative method: Keep the Polar Grid tool agile (don't click back to the black arrow) and click on any whitespace in your certificate. An options carte will pop upward and you can set the number of divisions to 6 and remove the concentric dividers by setting that option to 0.

   Advertisement

1. one

   Locate the Ellipse tool and create a circle. The Ellipse tool is function of the toolbar on the left side of the screen. It is a shaded ellipse. Hold downwardly ⇧ Shift and click on the white canvass, and drag the circle to the size that yous want.

   • Release the click on the mouse and and so release ⇧ Shift to make a perfect circumvolve.

2. 2

   Identify both vertical and horizontal guides through the center of the circumvolve. To place a vertical guide, click on the vertical ruler and drag correct towards the circle. Identify the guide over the vertical center points of the circle. To place the horizontal guide, click on the horizontal ruler and drag downwards toward the circle.^[7]

   • If the guides don't get properly placed the kickoff fourth dimension, you can click on them once more and drag them into place.

3. 3

   Locate the Polygon Frame tool. The Polygon Frame tool is located in the left toolbar underneath the Rectangle Frame tool grouping.^[viii] Click and hold on the Rectangle Frame tool to reveal the icons underneath. The tool looks like a hexagon with an "X" through it.

   • Click on the Polygon Frame tool to make information technology active.
   • It volition at present exist the icon showing on the toolbar.

4. four

   Draw an equilateral triangle with the Polygon Frame tool. With the Polygon Frame tool selected, click onto the white canvas to open up the options dialog box. Set the number of sides to 3 and click okay.^[9] With ⇧ Shift held down, click and drag a triangle that is slightly longer than the radius of your circle.

   • Don't release ⇧ Shift until later you let go of the mouse click. This will ensure that you have made a perfect equilateral triangle.

5. 5

   Align the triangle with the center of the circle. Make sure the blackness pointer is selected on toolbar and click on the triangle. Drag it to the center of the circle then that the bottom-left corner snaps to the center of the circumvolve.

   • The correct side of the triangle should hang outside the circumvolve with the lesser and left side of the triangle intersecting the circle.

6. half-dozen

   Join the circle and the triangle into a wedge with the Intersect tool. Highlight both the triangle and the circumvolve. With both highlighted, find the Intersect tool nested under Object>Pathfinder. Subsequently clicking Intersect, the circle should disappear and a wedge shape should announced.

   • This wedge is one-sixth of the circumvolve.

7. 7

   Copy and rotate the wedge 60°. Highlight the wedge and right click. Click on Transform>Rotate. Ready the angle to threescore° and click Copy. One time you click copy, a second wedge, rotated 60° from the original wedge, will appear.

   • Align this second wedge next to the first wedge. Y'all volition commencement to come across the circumvolve forming.

8. 8

   Repeat the rotate and copy process until you lot take 6 wedges. Using the 2d wedge you but fabricated, right click over again and rotate and copy the second wedge. This volition course a third wedge that you lot can place next to the second. Repeat this with the tertiary, fourth, and fifth wedge until y'all have six total wedges.

   • Marshal each wedge next to the previous one until you lot have a perfect circumvolve divided into 6 equal parts.

   Advertisement

Add New Question

• Question

  How do I divide a circle into 4 equal parts using a set square?

  

  Commencement you lot take to find and marker the exact eye of the circle. So depict a straight line from one side of the circle through the center to the other side of the circle. That's a diameter. Finally, utilise the gear up square to draw another diameter perpendicular to the first diameter. You have now divided the circle into four equal quadrants.

• Question

  How can I divide a circle into nine equal parts?

  

  Draw a radius. And so, using a protractor, draw eight more radii, each 40° from the nearest radius.

• Question

  How can I divide a circle into seven equal parts?

  

  360° ÷ seven = 51.43°. Use a protractor to draw 8 radii, each approximately 51.43° from each other.

• Question

  If I wanted to cut a vi" diameter cake into 10 even slices using a protractor to marking the top border (circumference) of the cake, how would I summate the distance?

  

  Divide 360° by 10. That'southward 36°. Utilize the protractor to measure x slices of 36° each.

Inquire a Question

200 characters left

Include your e-mail address to get a bulletin when this question is answered.

Submit

Advertizing

Video

Thanks for submitting a tip for review!

About This Article

Article Summary 10

To divide a circle into 6 equal parts, start past drawing a line through the heart of the circle starting on a point anywhere forth the border and ending at the reverse border. Adjacent, depict two more than lines that split one-half of the circle into three parts, making sure that the sections are as equal as possible. And then, extend those two lines into the other one-half of the circle to the contrary edges to create half-dozen wedge shapes. For tips on dividing a circle into equal parts using a compass, read on!

Did this summary help you?

Thank you to all authors for creating a page that has been read 171,328 times.

Did this article help you lot?

aldridgewearprapart.blogspot.com

Source: https://www.wikihow.com/Divide-a-Circle-Into-6-Equal-Parts

Share this post